Set Up Form Options for Relevé 1 Slips

Before printing Relevé 1 slips, set up your form options as follows:

1. In the Home window, on the Setup menu, choose Reports & Forms.
2. Under Government Forms, select Quebec Payroll.
3. Select a printer from the Printer list.
4. If you want to print the form and the contents on letter-size plain paper, choose Plain-paper laser and inkjet form in the Form Type list.
5. If you are printing on the pre-printed government forms:
1. Choose a pre-printed form in the Form Type list. You can either print Relevé 1 slips on a laser or ink jet printer using single-sheet paper, or on preprinted 8½-by-11-inch forms.
2. Choose a font type and size (10 pt Arial or smaller).
3. Perform a test print. If needed, change the top and left margin settings so that the text prints correctly in the boxes on the form. Depending on your printer, you may need to enter negative values to get the correct positioning.
6. If your printer is not currently set up for Letter size paper, click Setup, change the paper size to Letter, and click OK.
7. Click OK.

What do you want to do?

Print Relevé 1 slips

File Relevé 1 slips on paper

File Relevé 1 slips electronically